Biphenyl liquid crystal epoxy containing flexible chain: Synthesis and thermal properties

A biphenyl type liquid crystal epoxy (LCE) monomer 4,4′-di(2,3-epoxyhexyloxy)biphenyl (LCBP4) containing flexible chain was synthesized and the curing behavior was investigated using 4,4′-diaminodiphenylmethane (DDM) as the curing agent. The effect of curing condition on the formation of the liquid crystalline phase was examined. The cured samples show good mechanical properties and thermal stabilities. Moreover, the relationship between thermal conductivity and structure of liquid crystalline domain was also discussed. The samples show high thermal conductivity up to 0.28–0.31 W/(m*K), which is 1.5 times as high as that of conventional epoxy systems. In addition, thermal conductive filler, Al₂O₃, was introduced into LCBP4/DDM to obtain higher thermal conductive composites. When the content of Al₂O₃ was 80 wt%, the thermal conductivity of the composite reached to 1.86 W/(m*K), while that of diglycidyl ether of bisphenol A (Bis-A) epoxy resin/DDM/Al₂O₃ was 1.15 W/(m*K). Compared with Bis-A epoxy resin, the formation of liquid crystal domains in the cured LCE resin enhanced the thermal conductivity synergistically with the presence of Al₂O₃. Furthermore, the introduction of Al₂O₃ also slightly increased the thermal stabilities of the cured LCE.     

基于数据拼接的金刚石刀具刃口三维形貌表征技术

原子力显微镜(AFM)是获取金刚石刀具刃口纳米级三维形貌的重要手段,但其存在测量范围小,难以表征参与切削区域整段刃口形貌特征的问题。采用基于迭代最近点法的刃口AFM测量数据拼接算法,获得了由多组数据拼接得到的刃口纳米级三维形貌,并进行了切削实验验证。实验结果表明,采用的数据拼接方法可较好地用于表征刀具刃口三维形貌。     

某进口固体废物“铁精粉”的鉴别方法探析

为了确保不进口污染环境的固体废物，针对某冒充铁精粉的进口固体废物，通过外观、成分、物相分析进行了系统的鉴别。确定样品主要为经研磨加工的氧化铁皮，属于禁止进口的固体废物——轧钢产生的氧化皮。     

Effect of different quenching processes following solid-solution treatment on properties and precipitation behaviors of 7050 alloy

The effects of quenching in different ways following solid-solution treatment on properties and precipitation behaviors of 7050 alloy were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), selected area electron diffraction (SAED), hardness and electrical conductivity tests. Results show that after quenching in different ways, electrical conductivity of the alloy decreases rapidly in the first 48 h of natural aging. The electrical conductivity of 7050 alloy in natural aging state is determined by the size and density of GP zones, and the size of GP zones is the main factor. After natural aging for 70 d, the size of GP zones is 1.8–2.6 nm in matrix of the immersion quenched sample and it is 1.4–1.8 nm in matrix of both water mist and forced air quenched samples. After natural and artificial peak aging, the hardness of the water mist quenched sample is HV 193.6 and its electrical conductivity is 30.5% (IACS) which are both higher than those of the immersion quenched sample. Therefore, water mist quenching is an ideal quenching method for 7050 alloy sheets after solid-solution treatment.     

不同苯乙烯工艺技术经济分析及建议

通过对国内外苯乙烯市场供需趋势的梳理,针对4种苯乙烯主要生产工艺,重点从原料可获性、产品质量、能耗物耗以及成本竞争力等方面对不同工艺主要技术经济指标进行了对比分析,并提出了行业可持续发展的有关建议。     

鲸鱼优化支持向量机的短期风电功率预测

为提高风电预测的精度,提出一种鲸鱼优化支持向量机SVM(support vector machine)的组合预测模型。该模型针对风电序列的非平稳波动特性,首先应用集合经验模态分解技术EEMD(ensemble empirical mode de?composition)将原始风电序列分解为一系列不同特征尺度的子序列;并引入鲸鱼优化算法WOA(whales optimiza?tion algorithm)解决SVM中学习参数选择难的问题,进而对各子序列建立WOA_SVM预测模型;最后,叠加各子序列的预测值以得到最终预测值。仿真表明,所提EEMD_WOA_SVM模型具有较高的风电预测精度,显著优于其他基本模型。     

自动捕捉平衡系数试验电流工具设计

在电梯平衡系数传统测量方法中,存在电梯轿厢和对重平衡点难以判断、人为因素导致测量误差偏大、测量不准导致效率低等问题,为解决这些问题,设计出一款基于光电传感器和霍尔传感器的电流自动捕捉工具,除能够高效准确识别电梯轿厢和对重平衡点的位置外,还能通过无线信号传输处理,利用钳形电流表精确捕捉平衡点位置的电流值。经测试使用,该工具系统消除了在平衡系数测量过程中捕捉电流值的人为因素影响,并解决了无机房不能准确判断平衡点问题,有效的提高了检验工作的准确性和效率。     

利用非糖物质快速鉴别单花蜂蜜

本文利用非糖物质快速鉴别四种常见的单花蜂蜜(枸杞蜂蜜、荆条蜂蜜、枣花蜂蜜和洋槐蜂蜜)。利用固相萃取除糖提取蜂蜜非糖物质,并用高效液相色谱(HPLC)结合化学计量学进行蜂蜜花源的判定。发现了四种单花蜂蜜的非糖特征标志物。芦丁、丁香酸甲酯、阿魏酸的含量在四种蜂蜜中差异最大。对羟基苯甲酸和脱落酸在枸杞蜂蜜中平均含量分别为0.59μg/g和0.42μg/g,可作为枸杞蜂蜜的花源标志物;对香豆酸和肉桂酸在荆条蜂蜜中平均含量为0.08μg/g和0.05μg/g,可作为荆条蜂蜜的潜在花源标志物;阿魏酸、异阿魏酸是枣花蜂蜜的特征标志物,平均含量分别为0.40μg/g和0.76μg/g;洋槐蜂蜜的特征标志物是芦丁和丁香酸甲酯,平均含量为0.08μg/g和0.14μg/g。利用高效液相色谱指纹图谱结合化学计量学方法(主成分分析和判别分析),四种单花蜂蜜依据其花源被成功区分。本研究对蜂蜜真实性判定有重要参考价值,为后续蜂蜜真伪鉴别奠定基础。